Binks FluidHandlingCat BDP 5 23 16 002

Inside This Document

Operating and service manual for the Binks FluidHandlingCat BDP 5 23 16 002, a paint pressure feed tank — 32 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 Pressure Tanks FLUID DELIVERY NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to prevent damage in shipping. Bottom outlet kits are not available for 83C or 83Z pressure tanks. (D) =Direct Drive Agitator: Uses direct mount air motor and air adjusting valve. Zinc-Plated & Stainless Steel 2.8 gal. Pressure Tanks Binks ASME code PT tanks are a great choice in a 2 gallon pressure tank when spraying up to 80 psi of fluid pressure. ■ Choose 83C tanks for solvent-borne coatings ■ Choose 83Z tanks for water-borne coatings AIR REGULATION Single Reg Double Reg Single Reg Double Reg Disposable Liner Head Gasket Service Bulletin FLUID AGITATION No Agitation No Agitation Std. Agitation (D) Std. Agitation (D) – – – Zinc-Plated Throughout, Including Lid, Wetted Parts & Tank Shell 83C-210 83C-220 83C-211 83C-221 PT-78-K10 or K60 PT-33-1 SBBI-21-044 Zinc-Plated Tank Shell, Stainless Steel Lid & Wetted Parts 83Z-210 83Z-220 83Z-211 83Z-221 PT-78-K10 or K60 PT-33-1 SBBI-21-043 w/2 Regulators PART NO.: 83C-220 w/Agitator (2 Regulators) PART NO.: 83C-221 GALVANIZED STEEL 2, 5, 10 and 15 GALLON PRESSURE TANKS Binks 183G- ASME Code Tanks give you application flexibility for most solvent-borne applications. SINGLE REGULATED ✓ ✓ ✓ DOUBLE REGULATED ✓ ✓ ✓ SINGLE REGULATED WITH EXTRA S