Binks 183s2

Inside This Document

Operating and service manual for the Binks 183s2, a paint pressure feed tank — 12 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

15-GALLON STAINLESS STEEL TANK ASSEMBLIES – SPECIFICATIONS & OPTIONS SPECIFICATIONS STAINLESS STEEL TANKS Maximum Working Pressure 110 psi Tank Shell 304 Stainless Steel Tank Lid 304 Stainless Steel 2" NPT Fluid Outlet Bottom 304 Stainless Steel Agitator Paddle/Propeller Nylon, Glass Filled Agitator Shaft 303 Stainless Steel Agitator Shaft Seal Engineered PTFE, Stainless Steel Air Manifold Steel, Zinc Plate Plug (Air Manifold Coupling) 18-8 Stainless Steel AIR CONTROL OPTIONS TYPE APPLICATION No Regulation (Air inlet pressure gauge only) Holding tanks, Transfer tanks, Used where precision fluid pressure control is not required. Standard Single Regulation Provides standard fluid pressure control only. For use where precision control of both fluid and air pressures is not required. Also Used where atomization air can be taken from filter/regulator air lines. Standard Double Regulation Precision control for use with materials that are best applied at low, closely controlled, fluid and atomization air pressures. Used with portable air compressors or with air lines when no other means of air pressure regulation is available. Extra Sensitive Regulation Provides extremely accurate, low pressure, fluid pressure control Extra Sensitive Regulation with Standard Gun Regulation Provides extr