Binks 2.8 Gallon 83C

Inside This Document

Operating and service manual for the Binks 2.8 Gallon 83C, a paint pressure feed tank — 8 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

83C-211 PRESSURE TANK WITH AGITATOR 1 PT-423 Tank Assy. Kit (Includes 1 Ref. Nos. 1A, 18, 19, 20 & 21) 1A PT-420 Tank Shell 1 2 PT-33-1 Lid Gasket 1 3 PT-425 Lid, Zinc Plated (Agitator) 1 4 PT-418 Air Motor/Adapter Assy. (See Pg. 5 for Breakdown) *5 ---- Street Elbow 1/4" NPT (F) 1 x 1/4" NPT (M) n 6 H-2008 Nipple 1/4" NPT(M) (83C-210 & 83C-220) 2 x 1/4"NPS(M) (83C-211 & 83C-221) 3 7 HA-57011 Hose Assembly 1 8 HAV-500 Air Adjusting Valve1/4" NPS (F) 1 x 1/4" NPS (M) n 9 83-2727 Gauge (83C-210, 83C-211) 1 Gauge (83C-220, 83C-221) 2 n *9A ---- Pipe Plug 1/4" NPT(M)(Supplied/Reg) 1 n 10 HAR-511 Regulator (All regulated models) 1 n 10A HAR-507 Regulator (83C-220 & 83C-221) 1 11 SSP-30-ZN 90° Swivel Adapter 1/4" NPS (F) 1 x 1/4" NPT (M) *12 ---- Cross 1/4" NPT (F) 1 13 TIA-5080 Safety Valve - 80 PSI 1 14 PT-32 Handle 1 *15 ---- Hex Nut 3/8"-16 1 16 AD-11 Nipple 3/8" NPT (M) 1 x 3/8" NPT (M) S.S. *17 SSP-1939 Street Elbow 3/8" NPT (F) 1 x 3/8" NPT (M) S.S. 18 ---- Thumb Screw 4 19 ---- Yoke Assembly 4 20 ---- Cotter Pin, 3/32 x 1" 4 21 ---- Hinge Pin 4 22 PT-31 Fluid Tube, Galv. 1 23 PT-78-K10 or Tank Liner (Kit of 10 or 60) 1 PT-78-K60 24 PT-426 Lid, Zinc Plated 1 25 SSP-462-ZN Hex Nipple 1/4" NPT(M) 1 26 SS-2707 Air Relief Valve 1 n 27 83-4233 D. M. Nipple (Universal Pipe Thread) (83