Binks De-12, DE-15 Drum Elevator

Inside This Document

Operating and service manual for the Binks De-12, DE-15 Drum Elevator, a drum elevator — 16 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

EN D DE-12=1250mm [49.2"] Minimum air inlet pressure: 3 bar [44 psi] Maximum operating speed: Non Lubricated Earth connection resistance: <1Ω Weight: Temperature range: 0 - 40 °C [32 - 104 °F] Noise Level @ 7 bar [100 psi]: INTENDED USE C Optional Maximum Load Distance: 1000mm [39.4"] Up/Down controls: Included Pump controls: Optional Recommended air quality ISO 8573.1 Class 3.3.2 #: Maximum air inlet pressure: 7 bar [100 psi] Agitator controls: A Air inlet connection: SPECIFICATION Maximum Load: 30 Kg [66lb's] Stroke DE-15=1500mm [59"] B <70 dBA Leq 0.1m/s [4"/s] G1/2'' BSPP Female Oil: 0.1mg/m³ Water: -20ºC@7 bar [940 ppm] Dirt: 5 μm DE-15 = 71 Kg [156.5lb's] DE-12 = 65 Kg [143lb's] The pneumatic elevator is designed for raising and lowering a drum/tank cover which has equipment mounted to it, such as a pump, agitator or suction tube, generally for use in the painting industry. This allows the drum/tank to be changed in the raised position. It is for professional trained users only. 77-3313 R1.1 4/16 www.carlisleft.com EN 2318mm [91.5"] 2818mm [111"] 1318mm [52"] X RH Controls shown 1608mm [63.5"] 1858mm [73.5"] W 1068mm [42"] DE-15 Z 2858mm [113"] Dimension Y INSTALLATION DE-12 Dimensions in mm [inches] 3358mm [132.5"] 77-3313 R1.1 5/16 www.carlisleft.com EN ATEX SPECIAL CONDI