Binks 84-601 Back Pressure Valve
84-601 · 84-601, 6-1309, 77-2629
Binks 84-601 back pressure valve service manual (77-2629-R7). 4-page PDF with parts list and 6-1309 repair kit — view online or download free from CET.
Inside This Document
Carlisle Fluid Technologies service manual 77-2629-R7 (February 2021) for the Binks Model 84-601 back pressure valve: a 1/2" NPT(F), stainless steel, low-shear valve that holds back pressure in circulating paint systems so guns at the end of the loop see stable fluid pressure. The 4 pages cover the safety warnings, an exploded parts view with part numbers, and the parts included in the 6-1309 repair kit. CET repairs 84-601 valves in its shop and stocks the repair kit. Binks equipment is distributed and serviced by CET.
From the Document
77-2629-R7 (2/2021) 1 / 4 www.carlisleft.com • Indicates parts included in 6-1309 Repair Kit. • • • 1/2” NPT(F) MODEL 84-601 BACK PRESSURE VALVE 1/2” NPT, STAINLESS STEEL, LOW SHEAR EN SERVICE MANUAL EN 77-2629-R7 (2/2021) 2 / 4 www.carlisleft.com LOCK OUT / TAG-OUT Failure to de-energize, disconnect, lock out and tag-out all power sources before performing equipment maintenance could cause serious injury or death. OPERATOR TRAINING All personnel must be trained before operating finishing equipment. EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in serious injury. PROJECTILE HAZARD You may be injured by venting liquids or gases that are released under pressure, or flying debris. PINCH POINT HAZARD Moving parts can crush and cut. Pinch points are basically any areas where there are moving parts. INSPECT THE EQUIPMENT DAILY Inspect the equipment for worn or broken parts on a daily basis. Do not operate the equipment if you are uncertain about its condition. In this part sheet, the words WARNING , CAUTION and NOTE are used to emphasize important safety information as follows: Hazards or unsafe practices which could result in minor personal injury, product or property damage. ! CAUTION Hazards or unsafe practices which could result in severe personal injury, death or substantial property damage. ! WARNING Important installation, operation or maintenance information. NOTE Read the following warnings before
Document Details
- Brand
- Binks
- Type
- Manual
- Product Line
- 84-601
- Models
- 84-601, 6-1309, 77-2629
- Pages
- 4
- Language
- en
Related Documents
Binks 107-1343 Regulator
107-1343 Regulator · 107-1343 Regulator
Binks service sheet for the 107-1343 Regulator, an air/fluid pressure regulator. 1-page PDF — view online or download free from CET.
Binks 135-80 Pulse Chamber & Filter
135-80 Pulse Chamber & Filter · 135-80 Pulse Chamber & Filter
Binks service sheet for the 135-80 Pulse Chamber & Filter, a fluid filter/strainer. 2-page PDF — view online or download free from CET.
Binks 31-120 Heavy Duty Agitator
31-120 Heavy Duty Agitator · 31-120 Heavy Duty Agitator
Binks service sheet for the 31-120 Heavy Duty Agitator, a paint agitator / air-motor drive. 4-page PDF — view online or download free from CET.
Binks 31-133-CE Agitated Lid Assembly
31-133-CE Agitated Lid Assembly · 31-133-CE Agitated Lid Assembly
Binks service manual for the 31-133-CE Agitated Lid Assembly, a paint agitator / air-motor drive. 40-page PDF — view online or download free from CET.
