Binks 5-10-15 Gallon 183G

Inside This Document

Operating and service manual for the Binks 5-10-15 Gallon 183G, a paint pressure feed tank — 24 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

5/10/15-GALLON GALVANIZED TANK ASSEMBLIES – SPECIFICATIONS & OPTIONS SPECIFICATIONS GALVANIZED TANKS Maximum Working Pressure 110 psi Tank Shell SA-414 Steel, Galvanized (Zinc) Tank Lid SA-414 Steel, Galvanized (Zinc) Fluid Tube 3/8 in. Steel Pipe, Galvanized Fluid Outlet (Elbow) Steel, Zinc Plate Fluid Valve, Outlet Brass, Nickel Plate 3/8-18 NPS(M) Agitator Paddle/Propeller Nylon, Glass Filled Agitator Shaft Steel, Zinc Plate Agitator Shaft Seal Engineered PTFE, Stainless Steel Air Manifold Steel, Zinc Plate Plug (Air Manifold Coupling) Steel, Zinc Plate Bottom Outlet (Optional Kit) 304 Stainless Steel 3/4-14 NPS(M) AIR CONTROL OPTIONS TYPE APPLICATION No Regulation (Air inlet pressure gauge only) Holding tanks, Transfer tanks, Used where precision fluid pressure control is not required. Standard Single Regulation Provides standard fluid pressure control only. For use where precision control of both fluid and air pressures is not required. Also Used where atomization air can be taken from filter/regulator air lines. Standard Double Regulation Precision control for use with materials that are best applied at low, closely controlled, fluid and atomization air pressures. Used with portable air compressors or with air lines when no other means of air pressure regulation is availabl