Binks 2 Quart SG-2 PLUS Agitated

Inside This Document

Operating and service manual for the Binks 2 Quart SG-2 PLUS Agitated, a paint pressure feed tank — 8 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

EN 77-2842-R6.2 (4/2016) 4 / 8 Binks MODEL 80-651 SG-2 PLUS TM PRESSURE CUP WITH ROTARY AGITATOR NOTE Items 49 and 52 have left hand threads. INSTRUCTIONS 1. Depressurize and shut off the entire system before installing the conversion kit. 2. Remove regulator from cup. 3. Replace gauge (28) with gauge provided in the conversion kit. 4. Replace the regulating spring (37). 5. Inspect all other internal components of the regulator and replace with the new items from the conversion kit as needed and reassemble the regulator. 6. Reassemble the regulator to the cup. MODEL 80-651 LOW PRESSURE CONVERSION INSTRUCTIONS WARNING A ttempting to install the conversion kit while the system is pressurized could result in damage to components or bodily injury. ! EN 77-2842-R6.2 (4/2016) 5 / 8 Binks MODEL 80-651 SG-2 PLUS TM PRESSURE CUP WITH ROTARY AGITATOR 1 80-375 2 QT CANISTER ASM ................. 1 2 80-376 ✚ 2 QT CANISTER SUB-ASM ......... 1 3 20-4870 ✚❍ SPIROL PIN ................................. 4 4 80-381 ✚❍ CANISTER KNOB SWIVEL .......... 4 5 80-380 ✚❍ CANISTER KNOB ........................ 4 6 80-382 ✚❍ RETAINING RING ....................... 4 7 80-355 DISPOSABLE LINER .................... 1 8 80-392* LID GASKET ............................... 1 9 80-602 COVER MACHINING ..............