Binks 2 Quart SG-2 PLUS

Inside This Document

Operating and service manual for the Binks 2 Quart SG-2 PLUS, a paint pressure feed tank — 12 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

EN 77-2841-R5.4 (4/2016) 4 / 12 MODEL 80-600 SG-2 PLUS TM PRESSURE CUP (Standard) • Items NOT available separately. EN 77-2841-R5.4 (4/2016) 5 / 12 MODEL 80-600 SG-2 PLUS TM PRESSURE CUP (Standard) 1 80-375 2 QT CANISTER ASM .................... 1 2 80-376+ 2 QT CANISTER SUB-ASM ............ 1 3 20-4870+ ❍ SPIROL PIN .................................... 4 4 80-381+ ❍ CANISTER KNOB SWIVEL ............. 4 5 80-380+ ❍ CANISTER KNOB ........................... 4 6 80-382+ ❍ RETAINING RING ........................... 4 7 80-35 5 ● DISPOSABLE LINER ....................... 1 8 80-392* LID GASKET ................................... 1 9 80-602 COVER MACHINING ..................... 1 10 80-606 CHECK VALVE ASM ..................... 1 11 80-610 DIFFUSER ....................................... 1 12 80-389 FLUID TUBE NUT .......................... 2 13 80-388* FLUID TUBE SEAL ......................... 2 14 80-613 FLUID TUBE ASM .......................... 1 15 83-2484 DM NIPPLE, 1/4 NPT X 3/8 NPS .... 1 16 20-6582 SCREW ........................................... 2 17 80-373* HANDLE GASKET .......................... 1 18 80-604 MANIFOLD .................................... 1 19 80-12 RELIEF VALVE ................................ 1 20 20-353-1 JAM NUT, 5/16-18 ........................ 1 21 80-60