Binks 2 Gallon 183G & 183S

Inside This Document

Operating and service manual for the Binks 2 Gallon 183G & 183S, a paint pressure feed tank — 28 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

2-GALLON ASME TANKS – SPECIFICATIONS & OPTIONS SPECIFICATIONS GALVANIZED TANKS STAINLESS STEEL TANKS Maximum Working Pressure 110 psi 110 psi Tank Shell SA-414 Steel, Galvanized (Zinc) 304 Stainless Steel Tank Lid SA-414 Steel, Galvanized (Zinc) 304 Stainless Steel Fluid Tube 3/8 in. Steel Pipe, Galvanized 3/8 in. SS Pipe, 316 Stainless Steel Fluid Outlet (Elbow) Steel, Zinc Plate 316 Stainless Steel Fluid Valve, Outlet Brass, Nickel Plate 3/8-18 NPS(M) 316 Stainless Steel 3/8-18 NPS(M) Agitator Paddle/Propeller Nylon, Glass Filled Nylon, Glass Filled Agitator Shaft Steel, Zinc Plate 303 Stainless Steel Agitator Shaft Seal Engineered PTFE, Stainless Steel Engineered PTFE, Stainless Steel Air Manifold Steel, Zinc Plate Steel, Zinc Plate Plug (Air Manifold Coupling) Steel, Zinc Plate 18-8 Stainless Steel Bottom Outlet (Optional Kit) 304 Stainless Steel 3/4-14 NPS(M) 304 Stainless Steel 3/4-14 NPS(M) AIR CONTROL OPTIONS TYPE APPLICATION No Regulation (Air inlet pressure gauge only) Holding tanks, Transfer tanks, Used where precision fluid pressure control is not required. Standard Single Regulation Provides standard fluid pressure control only. For use where precision control of both fluid and air pressures is not required. Also Used where atomization air can be taken from filter/re