Wagner Unica U581 Manual

Inside This Document

Operating manual for the Wagner Unica U581, a material feed pump — 56 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 Unica 4-270 N. OPERATING MANUAL EDITION 09 /2015 PART NO. ZZB028ENG Contents 5.1.6 Example of typical installation 23 5.1.7 Earthing 24 5.2 Start up 26 5.2.1 Safety regulations 26 5.2.2 Pressure release procedure 27 5.2.3 Pump washing 27 5.2.4 Filling with working fluid 28 5.2.5 Pump stop 28 5.3 Finishing work and cleaning 29 5.4 Storing for long periods of time 29 6 FAULT LOCATION, MAINTENANCE AND REPAIR 30 6.1 Troubleshooting and solution 30 6.2 Maintenance 33 6.2.1 Lubrication 33 6.2.2 Washing and storing 33 6.2.3 Regular check of sealing and tightness 33 6.2.4 Plan of preventive maintenance 33 6.3 Pump repair 34 6.3.1 Maintenance of the hydraulic circuit 34 6.3.1.1 Operations on the hydraulic circuit during maintenance 36 6.3.1.2 Hydraulic circuit emptying 36 6.3.1.3 Hydraulic circuit filling 36 7 ACCESSORIES 37 7.1 Wall mounting kit 37 7.2 Stand kit 38 7.3 Compressed air supply kit 39 7.4 Spring kit for product valves 40 7.5 Suction hose kit 41 8 SPARE PARTS 42 8.1 How to order spare parts 42 8.2 Overview modules 44 8.3 Air motor 45 8.3.1 Pneumatic feeler 47 8.3.2 Reversing valve 48 8.4 Hydraulic circuit 49 8.5 Fluid section 51 8.5.1 Pump No. U581.00 52 5 Unica 4-270 N. OPERATING MANUAL EDITION 09 /2015 PART NO. ZZB028ENG 4HISOPERATINGMANUALISAVAILABLEINTHEFOLLOWING