Wagner Cobra 40-10 & 40-25 Manual

Inside This Document

The service manual for the Wagner Cobra — a fluid pump — 84 pages covering installation, operation, air-motor and lower-end service, seal and packing replacement, and the exploded parts diagrams with replacement part numbers. Wagner finishing equipment distributed and supported in North America by CET.

From the Document

B_04233 B_04234 Cobra 40-10 Cobra 40-25 High-pressure Double Diaphragm Pumps Version 01/2018 3 VERSION 01/2018 ORDER NUMBER DOC 2340851 Cobra 40-10 / 40-25 Table of Contents 1 ABOUT THESE INSTRUCTIONS 6 1.1 Preface 6 1.2 Warnings, Notices and Symbols in these Instructions 6 1.3 Languages 7 1.4 Abbreviations 7 1.5 Terminology for the Purpose of this Manual 7 2 CORRECT USE 8 2.1 Device types 8 2.2 Type of Use 8 2.3 For Use in Potentially Explosive Areas 8 2.4 Processible Working Materials 9 2.5 Misuse 9 3 IDENTIFICATION 10 3.1 Explosion protection identification 10 3.2 Identification "X" 10 3.3 Type plates 11 4 BASIC SAFETY INSTRUCTIONS 12 4.1 Safety instructions for the operator 12 4.1.1 Electrical Devices and Equipment 12 4.1.2 A Safe Work Environment 12 4.1.3 Personnel Qualifications 13 4.2 Safety Instructions for Staff 13 4.2.1 Personal Safety Equipment 13 4.2.2 Safe handling of WAGNER spray devices 14 4.2.3 Ground the Unit 14 4.2.4 Product hose 15 4.2.5 Cleaning and Flushing 16 4.2.6 Touching hot surfaces 16 4.2.7 Maintenance and Repair 17 4.2.8 Protective and monitoring equipment 17 5 DESCRIPTION 18 5.1 Components 18 5.2 Mode of operation 18 5.2.1 Air motor 18 5.2.2 Fluid section 18 5.3 Protective and monitoring equipment 19 5.4 Included items 19 5.5 Data 19 5.5.1 Materials of paint wetted parts 19 5.5.2 Technical data 20 5.5.3 Dimensions and connections 21 5.5.4 Volume flow 22 5.5.5 Performance diagrams 23 5.6 Cobra Pressure Regulator Unit 24 5.6.1 High-pressure Filter (Option) 24 6 ASSEMBLY AND COMMISSIONING 25 4 VERSION 01/2018 ORDER NUMBER DOC 2340851 Cobra 40-10 /…