Wagner PM 500 Manual

Inside This Document

Operating manual for the Wagner PM 500, a double-diaphragm material pump — 60 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

Operating manual Pneumatic double diaphragm pump PM500 Table of Contents 4 Order number 2335747 | Edition 08/2020 9 Troubleshooting and Rectification 43 10 Repairs 44 10.1 Repair Personnel 44 10.2 Repair Notes 44 10.3 Tools 45 10.4 Cleaning the Parts after Disassembly 45 10.5 Assembly of the Device 45 10.6 Replacing the Diaphragm (Due to Breakage) 45 11 Function Test after Repair Work 49 12 Disposal 50 12.1 Device 50 12.2 Consumable products 50 13 Accessories 51 14 Spare Parts 52 14.1 How Can Spare Parts Be Ordered? 52 14.2 Notes on Using Spare Parts 52 14.3 PM500 Spare Parts 53 15 Declaration of Conformity 56 15.1 EU Declaration of Conformity 56 Operating manual Pneumatic double diaphragm pump PM500 1 About these instructions Order number 2335747 | Edition 08/2020 5 1 ABOUT THESE INSTRUCTIONS 1.1 PREFACE The operating manual contains information about safely operating, maintaining, cleaning and repairing the device. The operating manual is part of the device and must be available to the operating and service personnel. The device may only be operated by trained personnel and in compliance with this operating manual. Operating and service personnel should be instructed according to the safety instructions. This equipment can be dangerous if it is not operated according to the ins