Wagner Jaguar, ProTec & Tiger Piston Pumps Manual

Inside This Document

The service manual for the Wagner Jaguar/ProTec/Tiger — a fluid pump — 84 pages covering installation, operation, air-motor and lower-end service, seal and packing replacement, and the exploded parts diagrams with replacement part numbers. Wagner finishing equipment distributed and supported in North America by CET.

From the Document

Jaguar 75-150 Jaguar 55-200 PROTEC 60-240 Tiger 72-300 Icebreaker Piston Pumps Protective Coating (PC) Flow rate 150 cm 3 – 300 cm 3 Version 02/2018 B_04259 3 VERSION 02/2018 ORDER NUMBER DOC 2340282 IceBreaker 150-300 cm 3 Contents 1 ABOUT THESE INSTRUCTIONS 6 1.1 Preface 6 1.2 Warnings, Notices and Symbols in these Instructions 6 1.3 Languages 6 1.4 Service Manual 7 1.5 Continuous-flow heater operating manual 7 1.6 Abbreviations 7 1.7 Terminology for the Purpose of this Manual 7 2 CORRECT USE 8 2.1 Device Types 8 2.2 Type of Use 8 2.3 For Use in Potentially Explosive Areas 8 2.4 Processible Working Materials 9 2.5 Misuse 9 3 IDENTIFICATION 10 3.1 Explosion Protection Identification 10 3.2 Identification "X" 10 3.3 Type plates 11 4 BASIC SAFETY INSTRUCTIONS 12 4.1 Safety Instructions for the Operator 12 4.1.1 Electrical Devices and Equipment 12 4.1.2 A Safe Work Environment 12 4.1.3 Personnel Qualifications 13 4.2 Safety Instructions for the Personnel 13 4.2.1 Personal Safety Equipment 13 4.2.2 Safe Handling of WAGNER Spray Devices 14 4.2.3 Grounding the Unit 14 4.2.4 Product hose 15 4.2.5 Cleaning and Flushing 16 4.2.6 Touching Hot Surfaces 16 4.2.7 Maintenance and Repair 17 4.2.8 Protective and Monitoring Equipment 17 5 DESCRIPTION 18 5.1 Components 18 5.2 Mode of Operation 18 5.2.1 Air motor 18 5.2.2 Fluid section 18 5.3 Protective and monitoring equipment 19 5.4 Included Items 19 5.5 Data 20 5.5.1 Materials of Paint-wetted Parts 20 5.5.2 Recommended Packings 20 5.5.3 Technical Data for Jaguar and PROTEC 21 5.5.4 Dimensions and Connections for Jaguar and PROTEC 22…