Wagner IceBreaker PC Manual

Inside This Document

Operating manual for the Wagner IceBreaker PC, an IceBreaker piston pump — 84 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 02/2018 ORDER NUMBER IceBreaker 150-300 cm 3 5.5.7 Volume Flow 25 5.5.8 Performance diagrams 26 5.6 Operating elements 27 5.6.1 Pressure Regulator Unit 27 5.7 Product Filter and Return Line 27 5.7.1 High-pressure Filter (Option) 27 5.8 PC Air Filter Set (Option) 28 5.9 PC Heater Set (Option) 29 5.10 Feed Pump (Option) 30 6 ASSEMBLY AND COMMISSIONING 31 6.1 Training of Assembly/Commissioning Personnel 31 6.2 Storage Conditions 31 6.3 Installation Conditions 31 6.4 Transportation 31 6.5 Assembly and Installation 32 6.5.1 Ventilation of the Spray Booth 33 6.5.2 Air Supply Lines 33 6.5.3 Product supply lines 33 6.6 Grounding 33 6.7 Commissioning 35 7 OPERATION 36 7.1 Training the Operating Personnel 36 7.2 Emergency Stop 36 7.3 Tasks 36 7.4 Pressure Relief / Work Interruption 37 7.5 Basic Flushing 38 7.5.1 Filling with Working Material 38 8 CLEANING AND MAINTENANCE 39 8.1 Cleaning 39 8.1.1 Cleaning Personnel 39 8.1.2 Decommissioning and Cleaning 39 8.1.3 Long-term Storage 39 8.2 Maintenance 40 8.2.1 Maintenance Personnel 40 8.2.2 Safety instructions 40 8.2.3 Safety Checks and Maintenance Work 41 8.2.4 Emptying Pump 43 8.2.5 Filling the Empty Pump 44 8.2.6 Cleaning and Replacing the High-pressure Filter 45 9 TROUBLESHOOTING AND RECTIFICATION 46 10 REPAIR WORK 47 10.1 Repair