Wagner EvoMotion 5-125 Manual

Inside This Document

The service manual for the Wagner EvoMotion — a fluid pump — 64 pages covering installation, operation, air-motor and lower-end service, seal and packing replacement, and the exploded parts diagrams with replacement part numbers. Wagner finishing equipment distributed and supported in North America by CET.

From the Document

C_00116 Piston Pump EvoMotion 5-125 Translation of the original operating manual II 2 G Ex h IIB T3/T4 Gb X For professional use. Always observe the information in this manual, particularly the safety instructions and the warning instructions. Store the manual in a safe place. Edition: 03/2021 Operating manual Piston Pump EvoMotion 5-125 Table of Contents Order number 2316596 | Edition 03/2021 3 TABLE OF CONTENTS 1 About these instructions 5 1.1 Preface 5 1.2 Warnings, Notices and Symbols in these Instructions 5 1.3 General Characters and Symbols 5 1.4 Languages 6 1.5 Abbreviations 6 1.6 Terminology for the Purpose of this Manual 6 2 Correct Use 8 2.1 Device type 8 2.2 Type of Use 8 2.3 For Use in Potentially Explosive Areas 8 2.4 Processible Working Materials 8 2.5 Misuse 9 3 Identification 10 3.1 Explosion Protection Identification 10 3.2 Identification "X" 10 3.3 Type Plate 11 4 Basic Safety Instructions 12 4.1 Safety Instructions for the Operator 12 4.2 Safety Instructions for the Personnel 13 5 Description 18 5.1 Components 18 5.2 Functioning 18 5.3 Protective and Monitoring Equipment 19 5.4 Extent of delivery 19 5.5 Data 20 5.6 Operating elements 25 6 Assembly and Commissioning 26 6.1 Training of Assembly/Commissioning Personnel 26 6.2 Storage Conditions 26 6.3 Installation Conditions 26 6.4 Manual Transport 26 6.5 Assembly and Installation 26 6.6 Grounding 28 6.7 Commissioning 31 7 Operation 33 7.1 Training the Operating Personnel 33 7.2 Emergency Stop 33 7.3 Tasks 33 7.4 Pressure Relief / Work Interruption 34 7.5 Basic Flushing 35 7.6 Filling with Working Product…