Sagola RC1 Air Flow Regulator Manual

Inside This Document

Instruction manual for the RC1 gun-mounted air flow regulator with pressure gauge, which gives the operator immediate, accurate pressure feedback at the gun for consistent atomization. Covers fitting, adjustment, and maintenance.

From the Document

Warnings Before putting the unit into operation, it is advisable to read all the instructions indicated below carefully. Likewise, accident prevention rules, regulations and guidelines for work centres and current laws and restrictions must be taken into account. The unit must be used only by personnel who have been trained adequately in their handling, and only for the uses for which it has been designed. It must not be in washing machine or be submerged in solvent. USE SAGOLA ANTISTATIC HOSES TO ELIMINATE POSSIBLE ELECTRICAL DISCHARGES THAT MIGHT CREATE THE RISK OF FIRE OR EXPLOSION. TO AVOID RUPTURE OR MALFUNCTION of the RC1 pressure gauge, adjust the static pressure of the air line correctly, up to a maximum of 6 bar (87 psi). A pressure regulator is recommended for this purpose. Compressed air main line pressure: 7 - 8 bar Filter Pressure Regulation 4 - 6 bar Gun Pressure Regulation 1.8 - 2.5 bar D Y N A M I C P R E S S U R E S T A T I C P R E S S U R E 11. Health and Safety Keep the working area clean and free of potentially dangerous waste (thinners, rags, etc...). While work