Sagola Altair LED Ultralight System Manual

Inside This Document

Owner's manual for the Altair LED Ultralight color-matching and inspection lamp. Covers charging and battery care, light modes, correct use for finish inspection and color matching, and maintenance.

From the Document

Attention Before starting the unit you must read, take into consideration and comply with all the indications described in this Manual. This manual must be kept in a safe place, accessible to all users of the unit. The unit must be started and handled exclusively by personnel instructed in its use and must be employed only for the purpose for which it was designed. Likewise, accident prevention standards, regulations, work centre directives and current legisla - tion and restrictions must be taken into consideration at all times. The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered trademarks or brand names of the company SAGOLA S.A.U. Introduction The lighting equipment ALTAIR LED is a high-intensity lighting device that is safe during normal operating use in which it is used to project light at a distance and the lens is not obstructed or blocked when spraying products through a spay gun. Thanks to its specific design and mounting on the gun, the light pattern does not interfere with any part of the gun. The equipment consists of the following: