DeVilbiss DVX Automatic Spray Gun Manual

Inside This Document

The service manual for the DeVilbiss DVX — a automatic spray gun — 44 pages covering mounting and air/fluid connections, nozzle configuration and adjustment, cleaning and maintenance, and the exploded parts diagram with part numbers. DeVilbiss finishing equipment distributed and supported in North America by CET.

From the Document

EN II 2 G X / Ex h II Gb X It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Carlisle Fluid Technologies representative for additional copies of this manual. SERVICE MANUAL IMPORTANT! DO NOT DESTROY READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT. DVXA Low Pressure, Air Atomisation Automatic Spray Gun, with Lever or Screw Type Manifold SB-E-3-012 R1.0 (09/2024) www.carlisleft.com EN Stainless Steel Nitride Coated Stainless Steel LEVER TYPE SCREW TYPE LEVER TYPE SCREW TYPE 940g 850g DIMENSIONS WITH MANIFOLD 1/8" NPSM 1/8" NPSM 1/4" BSP/NPSM* 1/8" NPSM LEVER TYPE SCREW TYPE 1/4" NPSM 1/4" NPSM P1= Air Inlet P1= Fluid Inlet P1= Cylinder Air Inlet * Dependant upon Region and gun model chosen. See Table 5 for additional information. 127 x 97 x 44 127 x 64 x 89 Stainless Steel Gun Body Material Quickclean™ Coated Aluminium P3= Cylinder Air Pressure 4 - 7 Bar [58 psi - 102 psi] ENVIRONMENTAL P1= Max Ambient Operating Temperature FUNCTIONAL DESCRIPTION 40°C Nominal [104°F] FLUID AND AIR INLET PRESSURES P1= Max Air Input Pressure 7 Bar [102 psi] P2= Max Fluid Input Pressure 7 Bar [102 psi] HDPE, Viton Extreme, PTFE MANIFOLD THREAD Air Cap Material Electroless Nickel Plated Brass Fluid Tip and Needle Construction The DVXP low pressure air atomising spray guns are designed to be fast changeover, modular construction applicators, for spray finishing on machines and fixed mountings. They can be mounted on either a rear entry, lever operated, fast detachable manifold, or a screw attached, low profile…