DeVilbiss AG-362 Petite Head

Inside This Document

Service manual SB-E-2-644 for the DeVilbiss AG-362P — the 'Petite' head version of the AG-360 series low-pressure, air-atomization automatic spray gun, with lever or screw type manifold. Designed as a fast-changeover, modular applicator for precision finishing on machines and fixed mountings, with rear-entry or manifold mounting. The 28 pages document stainless steel gun head and fluid passageways, nickel-plated brass air cap, 1/8" G connections, dimensions for both manifold types, and full service procedures and parts.

From the Document

EN II 2 G X T6 It is the Customer's responsibility to have all operators and service personnel read and understand this manual. READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT. IMPORTANT! DO NOT DESTROY SERVICE MANUAL DEVILBISS AG360 Series : Contact your local DeVilbiss representative for additional copies of this manual. AG362P Low Pressure, Air Atomisation Automatic Spray Gun, with Lever or Screw Type Manifold & 'Petite' Head EN P1 = P2 = P3 = P1 = P2 = P3 = FUNCTIONAL DESCRIPTION DIMENSIONS WITH MANIFOLD LEVER TYPE SCREW TYPE Max Ambient Operating Temperature 40°C Nominal [104°F] Gun Head and Fluid Passageways Stainless Steel Air Cap Material Electroless Nickel Plated Brass 1/8" G 121 x 97 x 44 121 x 64 x 89 Cylinder Air Pressure The AG362P low pressure air atomising spray guns are designed to be fast changeover, modular construction applicators, for precision spray finishing on machines and fixed mountings. The gun can be mounted on either a rear entry, lever operated, fast detachable manifold, or a screw attached, low profile manifold, dependant on the part number selected and mounting preference. Designed for precise spraying operations, typically in the Cosmetics and Glass industries, it is suitable for both water based and solvent based applications. The standard gun is fitted with a non-adjustable fluid needle travel for use with external control via fluid regulator, but an optional micrometer or ratchet adjustment needle control, can be fitted for flow control at the gun. The gun is designed as a flexible solution for the modern coating applicator,…