Binks Maple 7-15 Pump Manual

Inside This Document

The service manual for the Binks Maple — a fluid pump — 16 pages covering installation, operation, air-motor and lower-end service, seal and packing replacement, and the exploded parts diagrams with replacement part numbers. Binks finishing equipment distributed and supported in North America by CET.

From the Document

Instruction Manual Maple 7/15 Pump Model 10 40 41 Instruction Manual Page 2 of 16 77-3231-R3.0 Instruction Manual Page 3 of 16 77-3231-R3.0 Specification Pump Ratio 15:1 Max. Air Pressure Inlet 7 Bar Max. Fluid Pressure 105 Bar Nominal Flow Volume / Cycle 0.166 Litres 0.044 US Gall Fluid Output @ 60 cycles/min 10.0 Litres / min 2.6 US Gall / min Maximum Recommended Continuous Cycle Rate Maximum Recommended Intermittent Cycle Rate 20 Cycles /min 40 Cycles /min Fluid Connections Inlet Outlet 1” Sanitary ½” NPT Female Compressed Air Inlet 3/8” BSPP / NPSM Air Volume / cycle 0.33 SCFM (9.5 L/m) @ 45PSI (3.1 Bar) 0.65 SCFM (18.5 L/m) @ 90 PSI (6.2 Bar) Air Flow @ 15 cycles/min 6 bar Air Flow @ 30 cycles/min 6 bar 10 CFM (283 L/min) 20 CFM (566 L/min) Max. Pump Inlet Pressure 2 Bar (30 PSI) Air Quality ISO 8573.1 Class 3.3.2 # (See Note) Dirt 5 microns Water -20ºC@7bar (940ppm) Oil 0.1mg/m³ Total Weight of Pump 30 Kg / 66 lbs # Note: Class 3.4.2 Air Quality (Refrigerant dried - water + 3ºC@7bar) may be used, however, above 15 cycles/min optional heavy duty mufflers 192821 or piped exhaust system should be used, if used continuously. Instruction Manual Page 4 of 16 77-3231-R3.0 Instruction Manual Page 5 of 16 77-3231-R3.0 Instruction Manual Page 6 of 16 77-3231-R3.0 KEY = GREASE (AGMD-010) = LOCTITE = TORQUE = GREASE INTERNAL (AGMD-010) = MAINTENANCE ORDER (REVERSE FOR ASSY) = MAGNET HAZARD ITEM 6 DETAIL Instruction Manual Page 7 of 16 77-3231-R3.0 Parts List – 104041 ITEM PART No DESCRIPTION QTY REMARKS 1 0115-010102 AIR VALVE ASSEMBLY 1 2 161992 Ø117.5 x 2.62 VITON O-RING 2
3…