Binks 77 3232

Inside This Document

Operating and service manual for the Binks 77 3232, a Maple piston fluid pump — 20 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

EN Max. Pump Fluid Inlet Pressure 2 bar [30 psi] Air Quality ISO 8573.1 Class 3.3.2 Air volume / cycle @ 3.1 bar/45psi: Air volume / cycle @ 6.2 bar/90psi: Specification Fluid outlet connection: Compressed Air Inlet 1/2" BSPP / NPSM Maximum recommended continous cycle rate [cycles/min]: 20 580 l/m [20.5 CFM] Air consumption @ 30 cycles/min and 6 bar [87 psi] air inlet pressure: 1160 l/m [41 CFM] Maximum recommended intermittent cycle rate [cycles / min]: 40 Fluid inlet connection: Air consumption @ 15 cycles/min and 6 bar [87 psi] air inlet pressure: Ratio: 25:1 Maximum air inlet pressure: 7 bar [101.5 psi] Maximum fluid pressure: 175 bar [2500 psi] Nominal flow volume / cycle: 0.2 l/m [0.053 US gal/m] Output @ 60 cycles / min: 12 l/m [3.2 US gal/m] 20 l/m [0.7 SCFM] 40 l/m [1.4 SCFM] 1'' Sanitary # See Note Weight: 42 kg / 92 lbs 1/2'' NPT Female Dirt: 5 microns Water: -20°C @ 7bar [940ppm] Oil: 0.1mg/m³ # Note: Class 3.4.2 Air Quality (Refrigerant dried - water +3ºC@7bar) may be used, however, above 15 cycles/min optional heavy duty mufflers 192821 or piped exhaust system should be used, if used continuously. 77-3232 R3.2 4/20 www.carlisleft.com EN Dimensions and Mounting Details MOUNTING LOCATIONS SECTION A-A 1" Sanitary inlet 1/2'' NPT Outlet Connection EARTHING POINT AIR INL