Binks Gemini 41-818836 Manual

Inside This Document

The service manual for the Binks Gemini — a fluid pump — 23 pages covering installation, operation, air-motor and lower-end service, seal and packing replacement, and the exploded parts diagrams with replacement part numbers. Binks finishing equipment distributed and supported in North America by CET.

From the Document

Model 41-818836 Conductive Acetal Ball Valve Pump Table of Contents Engineering Data and Temperature Limitations 1 Warranty Information 1 Performance Curve 2 Dimensions 3 Metric Dimensions 3 Principle of Pump Operation 4 Installation and Start-up 4 Air Supply 4 Air Valve Lubrication 4 Air Line Moisture 4 Air Inlet and Priming 4 Between Uses 4 Troubleshooting 5 Important Safety Information 6 Composite Repair Parts Drawing 8 Overlay Option Drawing, Muffler Option Drawing 8 Available Service and Conversion Kits 8 Composite Repair Parts List 9 Air Valve Assembly Drawing 10 Air Valve Assembly Parts List 10 Air Valve Servicing 11 Pilot Valve Servicing 12 Intermediate Assembly Drawing and Servicing 13 Check Valve Drawing 14 Check Valve Servicing 14 Diaphragm Service Drawing, with Overlay 15 Diaphragm Servicing 16 Overlay Diaphragm Servicing 16 Pumping Hazardous Liquids 17 Converting the Pump for Piping the Exhaust Air 17 Exhaust Conversion Drawing 17 Converted Exhaust Illustration 17 Grounding the Pump 18 EC Declaration of Conformity - Machinery 19 EC Declaration of Conformity - ATEX 20 Explanation of ATEX Certificate 21 II 2GD T5 II 2 G c T5 II 3/2 G c T5 II 2 D c T100°c SERVICE & OPERATING MANUAL Original Instructions Binks • 195 International Blvd. • Glendale Heights, IL 60139 USA • Telephone: 1.800.99.BINKS, 630.237.5000 Toll Free Customer Service and Technical Support: 800-992-4657 • Toll Free Fax: 888-246-5732 Part Sheet 77-2998 B41-818836conductiveacetal-rev0812 Model 41-818836 Conductive Acetal Ball Valve Pump Page 1 General purpose, oil-resistant. Shows good solvent,…