Binks Gemini 41-818836

Inside This Document

Operating and service manual for the Binks Gemini 41-818836, a double-diaphragm fluid pump — 23 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

B41-818836conductiveacetal-rev0812 Model 41-818836 Conductive Acetal Ball Valve Pump Page 2 Performance Curve: B inks Model 41-818836 Conductive Acetal MODEL S05 Conductive Acetal Performance Curve Performance based on the following: elastomer fitted pump, flooded suction, water at ambient conditions. The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 1 0 CAPACITY U.S. Gallons per minute Liters per minute 100 90 2 (3.5) 4 (7) 80 70 60 50 40 30 20 10 10 20 30 40 50 60 0 0 BAR PSI HEAD 1 2 3 4 5 6 7 0 30 20 25 10 15 5 9.1 6 7.6 3 4.5 1.5 NPSHR FEET METERS 6 (10) 8 (13.5) 10 (17) 12 (20) 14 (24) 16 (27) 100 PSI (6.8 Bar) 80 PSI (5.44 Bar) 60 PSI (4.08 Bar) 20 PSI (1.36 Bar) Air Inlet Pressure 40 PSI (2.72 Bar) B41-818836conductiveacetal-rev0812 Model 41-818836 Conductive Acetal Ball Valve Pump Page 3 Dimensions: B inks Model 41-818836 Conductive Acetal Dimensions in inches (metric dimensions in brackets). Dimensional Tolerance .125" (3mm). 11.54 293 10.11 257 SUCTION PORT 1/2" NPT (INTERNAL) 1" NPT (EXTERNAL) DISCHARGE PORT 1/2" NPT (INTERNAL) 1" NPT (EXTERNAL) (ALSO AVAILABLE IN BSP TAPERED) (ALSO AVAILABLE IN BSP TAPERED) 7.46 189 .07 2 5.46 139 9.79 249 1.42 36 3.09 78 1.75 44 1.75 44 AIR INLE