Binks E20-140 Electric High Pressure Pump

Inside This Document

Operating and service manual for the Binks E20-140 Electric High Pressure Pump, an electric-drive high-pressure pump system — 36 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

SPECIFICATION Fluid outlet connection: Fluid inlet connection: AC Induction Electric Motor 140 bar [2030 psi] EN 100mm [4 ins] Intermittent max. fluid output @ 60Hz [30 cycles/min] Recommended min. continuous fluid output @ 2Hz [1 cycles/min] Max. Inlet Pressure 400V 3PH 5.5 kW @ 50Hz 460V 3PH 7.5 hp @ 60Hz 2 ½'' NPT (Female) 1 1/2'' NPT (Female) 20 litres/min [5.3 US gal/min] 0.666 litres/min [0.176 US gal/min] 0.666 litres [0.176 US gal] 675 kg [1500 lbs] 100 bar [1450 psi] Nominal pump stroke: Nominal flow volume / cycle: Total Weight of Pump (inc electric motor) Gearbox Oil (EU Model) Maximum fluid pressure: AC Induction Electric Motor - USA Model Recommended max. continuous fluid output @ 15Hz [7.5 cycles/min] Synthetic 220 (typically Agip Blasia S) 5 litres/min [1.32 US gal/min] 5.5 kW 4Pole 1460 RPM - EU Model 5.5 kW 4Pole 1460 RPM - Japan Model 77-3242 R1.5 4/36 www.carlisleft.com EN OUTLET 1½'' NPT (Female) INLET 2½'' NPT (Female) The Pump must be securely mounted to a suitable flooring surface using appropriate fasteners. DIMENSIONS AND MOUNTING DETAILS Two lifting eyes on centre of gravity if needed M6 HEX. Head screw for pump earth grounding; the Pump Frame must be wired to a suitable earth ground to ensure that there is no possibility of static build up. 77-3242 R1.5