Binks E14-210 Electric High Pressure Pump

Inside This Document

Operating and service manual for the Binks E14-210 Electric High Pressure Pump, an electric-drive high-pressure pump system — 36 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

Gearbox Oil (EU Model) Maximum fluid pressure: 0.467 litres [0.123 US gal] 675 kg [1500 lbs] 100 bar [1450 psi] Nominal pump stroke: Nominal flow volume / cycle: Intermittent max. fluid output @ 60Hz [30 cycles/min] Recommended min. continuous fluid output @ 2Hz [1 cycles/min] Max. Inlet Pressure 400V 3PH 5.5 kW @ 50Hz 460V 3PH 7.5 hp @ 60Hz 2'' NPT (Female) 1 1/2'' NPT (Female) 14 litres/min [3.7 US gal/min] EN 100mm [4 ins] Fluid inlet connection: 0.467 litres/min [0.123 US gal/min] SPECIFICATION Fluid outlet connection: 5.5 kW 4Pole 1460 RPM - EU Model 210 bar [3046 psi] AC Induction Electric Motor AC Induction Electric Motor - USA Model Recommended max. continuous fluid output @ 15Hz [7.5 cycles/min] Synthetic 220 (typically Agip Blasia S) 3.5 litres/min [0.925 US gal/min] Total Weight of Pump (inc electric motor) 5.5 kW 4Pole 1460 RPM - Japan Model 77-3323 R1.3 4/36 www.carlisleft.com EN OUTLET 1½'' NPT (Female) INLET 2'' NPT (Female) M6 HEX. Head screw for pump earth grounding; the Pump Frame must be wired to a suitable earth ground to ensure that there is no possibility of static build up. DIMENSIONS AND MOUNTING DETAILS Two lifting eyes on centre of gravity if needed The Pump must be securely mounted to a suitable flooring surface using appropriate fasteners. 77-3323 R1.3