Binks E10-280 Electric High Pressure Pump

Inside This Document

Operating and service manual for the Binks E10-280 Electric High Pressure Pump, an electric-drive high-pressure pump system — 36 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

0.33 litres/min [0.073 US gal/min] AC Induction Electric Motor - USA Model 2.5 litres/min [0.55 US gal/min] Total Weight of Pump (inc electric motor) 5.5 kW 4Pole 1460 RPM - EU Model 5.5 kW 4Pole 1460 RPM - Japan Model 400V 3PH 5.5 kW @ 50Hz 460V 3PH 7.5 hp @ 60Hz Gearbox Oil (EU Model) Maximum fluid pressure: Recommended max. continuous fluid output @ 15Hz [7.5 cycles/min] Synthetic 220 (typically Agip Blasia S) 0.33 litres/min [0.073 US gal/min] 675 kg [1500 lbs] 100 bar [1450 psi] Nominal pump stroke: Nominal flow volume / cycle: EN 100mm [4 ins] Intermittent max. fluid output @ 60Hz [30 cycles/min] Recommended min. continuous fluid output @ 2Hz [1 cycles/min] Max. Inlet Pressure Fluid outlet connection: Fluid inlet connection: AC Induction Electric Motor 280 bar [4060 psi] 10 litres/min [2.2US gal/min] 2'' NPT (Female) 1 1/2'' NPT (Female) SPECIFICATION 77-3332 R1.1 4/36 www.carlisleft.com EN OUTLET 1½'' NPT (Female) INLET 2'' NPT (Female) M6 HEX. Head screw for pump earth grounding; the Pump Frame must be wired to a suitable earth ground to ensure that there is no possibility of static build up. DIMENSIONS AND MOUNTING DETAILS Two lifting eyes on centre of gravity if needed The Pump must be securely mounted to a suitable flooring surface using appropriate fasteners. 77-3332