Binks DX200

Inside This Document

Operating and service manual for the Binks DX200, a double-diaphragm fluid pump — 24 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

EN E 0 - 40 °C [32 - 104 °F] Ratio: 79.8 dBA Leq Minimum air hose internal diameter Weight: <1 Ω A B Maximum air inlet pressure: Noise Level @ 40 cycles/min & 7 bar [100 psi]: Earth connection resistance: C Air volume / cycle @ 6.9 bar/100psi: Air flow @ 30 cycles / min 6.9 bar / 100psi: Ø9.5mm Recommended air quality ISO 8573.1 Class 3.3.2 #: 156.9L [5.54 SCFM] Specification 47.8L [1.69 SCFM] 3:1 21 bar [305 psi] 40 Fluid inlet connection: Maximum fluid pressure: 0.14 Litres [0.037 US gall] Output @ 60 cycles / min: Maximum Recommended Continous Cycle Rate [cycles/min]: 25 Maximum recommended wet suction lift (continuous) 8.4 Litres/min [2.2 US gall/min] Displacement per cycle: Maximum Recommended Intermittent Cycle Rate [cycles / min]: Air flow @ 10 cycles / min 6.9 bar / 100psi: 5.0L [0.18 SCFM] Temperature range Maximum air inlet pressure: 4 bar [58 psi] while flushing 1/2'' BSPP Female 1/2'' BSPP Female 300 Millibar Vacuum Dirt: 5 μm Water: -20ºC@7bar [940ppm] Oil: 0.1mg/m³ Fluid outlet connection: Non Lubricated while pumping 7 bar [100 psi] DX200-3SN: 17.9 Kg [39.4lb's] DX200-3SP: 21.1 Kg [46.5lb's] DX200-3SM: 19.1 Kg [42.1lb's] 77-3212 R1.6 4/24 www.carlisleft.com EN Installation Z DX200-3SN Y 262mm 242mm Dimension 410mm 390mm 344mm 324mm DX200-3SM DX200-3SP 77-3212 R1.6