Binks AX200L Air Motor Assemblies

Inside This Document

Operating and service manual for the Binks AX200L Air Motor Assemblies, a medium-/high-pressure piston pump outfit — 10 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

77-2958-R2 (1/2018) 4 / 10 EN www.carlisleft.com Parts are included in 250703 Seal kit. Parts are included in 250702 Cylinder seal kit. Parts are included in 250649 Valve repair kit. Parts are included in 250701 Hardware kit. Parts are included in 250651 Exhaust seal kit. Recommended grease p/n: AGMD-010 AX200L AIR MOTOR ASSEMBL IES WARNING Item 29 should not be removed or modified in any way. It is necessary for safe operation of the air motor. Operating the air motor beyond its maximum air inlet pressure may result in a catastrophic failure of downstream components, and injury. ! 77-2958-R2 (1/2018) 5 / 10 EN www.carlisleft.com AX200L AIR MOTOR ASSEMBL IES ITEM NO. PART NO. DESCRIPTION QTY. COMMENTS 1 192049 M8 HEX NUT S.S. 4 ◊ 2 165108 M8 SPRING WASHER S.S. 4 ◊ 3 193159 EXHAUST MANIFOLD ASSEMBLY 1 4 165994 M8 x 1.25 x 44mm STUD S.S. 4 ◊ 5 193363 EXHAUST GASKET 2 † 6 193320 QEV CAP 2 7 162765 O-RING 2 x 46mm 2 • ▲ † 8 0115-010463 QEV PISTON 2 •  † 9 162766 O-RING 2 x 13mm 2 • ▲  10 0115-010051 O-RING 2 x 4mm 4 • ▲  11 177000 M8 x 1.25 x 12mm BHCS S.S. 2 ◊ 12 0115-010037 POPPET ASSEMBLY 2 •  13 193689 M16 EYEBOLT 1 ◊ 14 165981 M14 x 2mm DOME NUT S.S. 8 ◊ 15 165982 M14 SPRING WASHER 8 ◊ 16 193807 AX200L UPPER END CAP 1 17 162814 O-RING 2 x 200mm 2 • ▲ 18 193150 AIR MOTOR TIE