Binks SprayVantage 3 HVLP Outfit

Inside This Document

System sheet 77-5517 for the Binks SprayVantage 3 HVLP outfit (98-3164) built around the SV100 gun with the recommended 690 air nozzle. The outfit system diagram maps every connection: 3/8 NPS fluid to gun, 1/4 NPS air to gun, the 83C-220 ASME-rated pressure tank with two regulators, 71-31101 3/8" × 25 ft and 71-1217 5/16" × 3 ft air hose assemblies, and the 135-1100 cart assembly — a complete, ready-to-spray HVLP pressure-feed package specified part by part.

From the Document

EN 77-5517-R1.1 (4/2015) 1 / 4 SERVICE MANUAL 98-3164 SV100 & SV25 CONVERSION – OUTFIT SYSTEM SHEET 7041-6931-1 (SV100 – 690 Air Nozzle Recommended) FLUID TO GUN (3/8 NPS) AIR TO GUN (1/4 NPS) AIR IN (FROM COMPRESSOR) 71-31101 Air Hose Assy. 3/8 x 25 ft. ERGO-FLEX 83C-220 ASME-Rated Pressure Tank 2 Regulators, No Agitator 71-1217 Air Hose Assy. 5/16 x 3 ft. 135-1100 Cart Assembly 71-3303 Fluid Hose Assy. 3/8 x 25 ft. 135-1130 3HP Puma Compressor Model OD3006A 115 VAC, 13A Single Phase 9.9 CFM Displacement 6.2 CFM Free Air @43 PSI 6.6 Gallon Tank Capacity Compressor Weight 64 lbs. 7041-1500-1 (SV25 Internal Mix Bleeder Gun) AIR TO GUN (1/4 NPS) EN 77-5517-R1.1 (4/2015) 2 / 4 Binks reserves the right to modify equipment specification without prior notice. LOCK OUT / TAG-OUT Failure to de-energize, disconnect, lock out and tag-out all power sources before performing equipment maintenance could cause serious injury or death. OPERATOR TRAINING All personnel must be trained before operating finishing equipment. EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in serious injury. PROJECTILE HAZARD You may be injured by venting liquids or gases that are released under pressure, or flying debris. PINCH POINT HAZARD Moving parts can crush and cut. Pinch points are basically any areas where there are moving parts. INSPECT THE EQUIPMENT DAILY Inspect the equipment for worn or broken parts on a daily basis. Do not operate the equipment if you are uncertain about its condition. In this part sheet, the words WARNING…