Binks SmartHP Pumps

Inside This Document

Product brochure for the Binks SmartHP Pumps, an electric-drive high-pressure pump system. Summarizes features, configurations, and technical data — a quick reference before consulting the full manual. Distributed by CET.

From the Document

Binks Model Applications Maximum Flow Maximum Pressure E20-140 • For applications requiring very high flow but low pressure demands • Can capture additional value, with one Smart HP ™ Pump fulfilling both supply and booster pump requirements (requires installation of larger diameter pipework) • Greenfield solution 20 L/minute (5.3 gal/minute) 140 bar (2,030 psi) E14-210 • For higher pressure with lower flow applications • Brownfield retrofit solution (existing pipework limitations) 14 L/minute (3.7 gal/minute) 210 bar (3,045 psi) E10-280 • Highest pressure for restrictive pipework • Brownfield retrofit solution (existing pipework limitations) 10 L/minute (2.6 gal/minute) 280 bar (4,060 psi) Current Range of the Binks ® Smart HP ™ Electric Sealer Pump Family Improved Sound Levels During the course of normal operations, traditional air motors emit bursts of air exhaust at regular intervals. However, when multiple pumps are all firing in a system, each working slightly differently for performance, the noise in the pump room can be deafening. The Smart HP ™ Electric Sealer Pump eliminates this source of noise, drastically reducing the overall noise levels in the pump room or on the production floor. 30 25 20 15 10 5 0 0 20 40 60 80 100 120 0 500 1000 1500 2000 2500 3000 3500 4000 3 2