Binks DX200

Inside This Document

Product brochure for the Binks DX200, a double-diaphragm fluid pump. Summarizes features, configurations, and technical data — a quick reference before consulting the full manual. Distributed by CET.

From the Document

Ratio 3:1 Max Air Pressure 100 psi (7 bar) Max Fluid Pressure 305 psi (21 bar) Nominal Flow Volume / Cycle 0.037 gal (0.14 L) Fluid Output @ 60 Cycles/Min 2.2 gal/min ( 8.4 l/min) Max Recommended Continuous Cycle Rate 25 Cycles /min Max Recommended Intermittent Cycle Rate 40 Cycles /min Inlet Fluid Connection 1 / 2 ” BSPP Female Outlet Fluid Connection 1 / 2 ” BSPP Female Maximum Dry/Wet Lift (Head) 22.6ft (6.9m)/ 28.5 ft (8.7m) Air Inlet 1 / 4 ” Universal (BSPP/NPSM) Female Air Volume / cycle @ 6.9Bar/100psi 0.18 SCFM (47.8 l) Air Flow @ 10 cycles / min 6.9Bar/100psi 1.69 SCFM (47.8 l) Air Flow @ 30 cycles / min 6.9Bar/100psi 5.54 SCFM (156.9 l) Air Quality ISO 8573.1 Class 3.3.2 # Dirt 5 microns Water -20°C @ 100 psi (940 ppm) Oil 0.1mg/m 3 Non Lubricated Noise Level 79.8 dBA Weight - Bare Pump 39.4 lbs (17.9 Kg) Temperature Range 32 - 104 °F (0 - 40 °C) Dimensions (W x H x D) 7.6”X10.35”X10.4 (193mmX262mmX264) Fluid Filter Option DX200-3 can be ordered with a filter (rated up to 305 psi) which can be secured neatly against the pump’s wall bracket, saving on installation time. The filter may also be ordered as an accessory item for retro- fitting. This new inline filter gives superior flushing. Sanitary clamps enable quick disconnection of the filter housing for inspection and