Walther Pilot/Parts Sheet

Walther Pilot MDG 8-500 Material Pressure Tanks Parts List

MDG Pressure Tanks · MDG 8, MDG 500

Walther Pilot MDG 8 to MDG 500 material pressure tanks replacement parts list (German/English). 9-page PDF — view online or download free from CET.

Viewing: Walther Pilot MDG 8-500 Material Pressure Tanks Parts List

Inside This Document

The Walther Pilot replacement parts list for the MDG 8 through MDG 500 material pressure tanks: 9 pages in German and English, distributed by CET. It gives the exploded views and part numbers for the lids, regulators, gauges, safety valves, agitators, outlets and seals across the larger MDG tank range. Walther Pilot equipment is distributed and serviced in the U.S. by CET.

From the Document

/ When ordering replacment parts please make sure to state the type-designation, fabrication-number, operating- pressure-rating and year of contrcution. / It is recommended to keep in stock all faced parts (wear-parts). / The technical details of the specific modifications and construction variants may differ. In case of eventual unclear issues we firmly recommend to contact WALTHER-PILOT, specifying the pressure-vessel type and serial-number of the device. Replacment-parts of the air-inlet-mountings are listed on a seperate replacement-part-list! Replacment-parts for WALTHER-PILOT-Agitators are listed on seperate data-record-sheets! Pull the handwheel ¬ upwards, turn it anticlockwise to the stop an push it down again to lock it. Remove rhe white spacer-disc ¯ and the diaphragm-assembly ° from the housing dismantle the base-part 1. Pull the valve piston ³ out of the housing 3. Take the O-ring ² & μ out of the housing Reassembly Reassembly of the unit is carried out in reverse order to dismantling using the spares: Lower part first, upper part last. Note on reassembly of the top-part 1. Screw the upper part 1 to 2 turns into the housing. Unlock the handwheel, hold the upper part with one hand and turn the handwheel 3 - 4 turns to the right: this centres the diaphragm to the valve piston. Turn the handwheel back to the left and lock it. Screw the upper part in tight up to its stop.

Document Details

Brand
Walther Pilot
Type
Parts Sheet
Product Line
MDG Pressure Tanks
Models
MDG 8, MDG 500
Pages
9
Language
en

Related Documents

Walther PilotParts Sheet

Walther Pilot MDG 1-4 Material Pressure Tanks Parts List

MDG Pressure Tanks · MDG 1, MDG 2, MDG 3, MDG 4

Walther Pilot MDG 1 to MDG 4 material pressure tanks replacement parts list (German/English, rev. 4-2, 03/2010). 5-page PDF — view online or download free from CET.

industrial
Walther PilotBrochure

Walther Pilot Modular Pressure Tanks

Walther Pilot product brochure for the Walther Pilot Modular Pressure Tanks. 2-page PDF — view online or download free from CET.

industrial
Walther PilotBrochure

Walther Pilot Small Material Pressure Tanks

Walther Pilot product brochure for the Walther Pilot Small Material Pressure Tanks. 2-page PDF — view online or download free from CET.

industrial