Wagner FlexControl Plus Manual

Inside This Document

Operating manual for the Wagner FlexControl Plus, a two-component (2K) mixing and dosing system — 84 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 FlexControl plus OPERATING MANUAL VERSION 03/2013 ORDER NUMBER Table of Contents 6.4 Electrical Connections 31 6.5 Pneumatic Connections 31 6.6 Product Connections 31 6.7 Flow Meter Control 32 6.8 Lack-of-product Protection 32 6.9 Grounding the System 33 6.10 Modem Connection 35 6.11 PC Connection 35 7 CONTROLLER 36 7.1 Control Elements 36 7.2 Operating Panel 36 7.2.1 Paint Recipe Input 37 7.2.2 Flushing Recipe Input 38 8 COMMISSIONING 39 8.1 Preliminary Cleaning and Pressure Tightness Test 40 8.2 Pressure Relief 41 8.3 Filling the System and Calibration 42 8.3.1 Filling the System 42 8.3.2 Calibration of the Flow Meters 43 8.4 Starting Work 44 8.5 Flushing, Recipe Change 45 8.5.1 Flushing 46 8.5.2 Recipe Change 46 8.6 General 46 8.7 Brief Instructions for Commissioning 47 8.8 Brief Instructions for the Sprayer 48 8.9 Brief Instructions for the Admin Submenu 49 8.10 Brief Instructions for the Service Submenu 50 9 MAINTENANCE 52 9.1 Cleaning of the System 52 9.2 Cleaning of the Filters 52 9.3 Condensate Drainage from the Filter-reducer 52 9.4 Flow Meter 53 9.4 Product Valves 54 9.6 High Pressure Hoses 55 9.7 Electrical Control Unit 55 9.8 Decommisioning 55 10 FAULT RECTIFICATION 56 10.1 Alarm Messages and Appropriate Rectification 57 10.2 Fault Rectification 59 11 INSTALLATION O