Sagola X 4100 Series Manual

Inside This Document

The combined manual for the X 4100 series in all three feed configurations — gravity, pressure, and suction. Covers setup for each feed type, air cap and needle/nozzle combinations, spraying across automotive, wood, and industrial coatings, cleaning, and the full parts breakdowns.

From the Document

Functional Description of the Equipment The SAGOLA gun model X 4100 Series (Gravity, Pressure and Suction) can be used for applying appropriately diluted products (paints, lacquers, varnishes, etc.), used widely in the automotive industry, timber industry, plastics, etc. The SAGOLA gun model 4100 Xtreme Ceramic can be used for spraying highly abrasive and high micronage products, used widely in the Construction, Industry in general (structural, bodyshop industry, ceramics, vitrified enamels, etc.) In the gravity or suction version; the product to be applied is placed in the cup provided for this purpose, from which it flows by gravity or suction to the fluid tip and is then mixed with spraying air in a way that can be controlled from outside the air nozzle. In the pressure version; the product to be applied is placed in the pressure tank (hereinafter Reboiler) or using a pressure pump. From here it flows through a hose to the fluid tip and is them mixed with spraying air in a way that can be controlled from outside the air nozzle. When the trigger is pulled back to the first position