Sagola PSAM 550 Airless Manual

Inside This Document

The complete manual for the PSAM 550, Sagola's high-pressure airless gun reaching up to 550 bar for the most demanding professional applications. Built with a stainless-steel trigger, tungsten-carbide seats and seals, and anti-corrosion fluid passages. Covers safe high-pressure operation, the four filtration options (30/50/100/200 mesh), tip selection, PPE requirements, and the full parts breakdown.

From the Document

Always use the appropriate Personal Protective Equipment (PPE), including gloves, safety goggles, and certified respirators, to minimise exposure to hazardous substances. Never aim the spray gun at people, animals, or unintended surfaces. The high-pressure Airless system can cause severe injuries due to accidental fluid injection. HAZARD: Injection injury A high pressure stream produced by this equipment can pierce the skin and underlying tissues, leading to serious injury and possible amputation. Inform the physician of the type of coating material or cleaning agent with which the injury was caused. Equipment surfaces and fluid that is heated can become very hot during operation. If you are not standing securely, you could fall and be seriously injured. Before performing any maintenance or cleaning, ensure that system pressure is fully released and disconnect the spray gun from the product supply source. Do not modify or alter any components without the manufacturer’s authorisation, as this may affect performance and safety. Adhering to these warnings will ensure the safe and effici