Sagola DM Pumps Manual

Inside This Document

The complete manual for Sagola's DM pneumatic transfer/feed pumps, covering the DM 1/300 and DM 1/400 ratios. Details installation, hose handling and temperature limits, priming and operation, compatible materials, cleaning, and the full parts breakdown for long service life.

From the Document

Do not use the hoses to move the equipment by dragging it. Do not place them in contact with products that may affect them and do not expose them to temperatures greater than 65 o C or less than –20 o C. Insofar as possible, keep the container of the product to be transferred fixed and inserted into it, the product return tubing (probe) (Nº 9 in Figure 1). The unit has been designed for a long service life and can be used with most of the usual products on the market. Its use with highly aggressive products will quickly increase the need for maintenance and spare parts. If the equipment is going to remain for a long time running empty, disconnect it from the general air network. SAGOLA recommends the installation of some sort of SAGOLA air treatment equipment in the general compressed air network, in order to optimise the operation of the equipment. Functional description of the equipment The DM BASIC Aluminium, DM BASIC 300 and DM BASIC Abrasives pumps, as well as the DM 01/300 and DM 01/400 equipment units serve the purpose of apply the products that are suitable diluted and usuall