Sagola 475 XTech Manual

Inside This Document

Owner's manual for the 475 XTech, Sagola's premium compact gun for spot repair and fine detail work. Covers setup, fine pattern control, cleaning, and the parts breakdown.

From the Document

Before putting the unit into operation, it is advisable to read all the instructions indicated below carefully. Likewise, accident prevention rules, r e g u l a t i o n s a n d g u i d e l i n e s f o r w o r k centres and current laws and restrictions must be taken into account. To fulfil those requirements, the product meet the European standards: CEDirective regarding machines (Directiva 2006/42/CE) and the regulations concerning the transposition thereof. The following standardised regulations have been applied: UNE :2012, UNE -1:2012, :2013 These also meets the following Regulations and Directives: ATEX Directive (Directive 2014/34/CE) II 2G X Protection Level II2G suitable for use in Zones 1 and 2 “ X ” marking all static electricity is discharged through air pipes (the air hoses must be "STATIC-FREE" ) It is also in conformity with the following directives: UNE -1:2011 Non electrical equipment used for potentially explosive atmospheres Full technical documentation and service instructions are available. ● Before putting the unit into operation spray cleaning solvent in order t