Sagola 4600 HEX Manual

Inside This Document

Instruction manual for the 4600 HEX, a special-edition of the DFT-equipped 4600 flagship. Same Dynamic Flow Technology air cap engineering and interchangeable-parts design as the standard 4600, covered here with setup, adjustment, maintenance, and parts.

From the Document

Components 1 Air nozzle 2 Head packing gland 3 Trigger 4 Valve packing gland 5 Air inlet 6 Air flow regulator 7 Air valve 8 Product regulator 9 Spray width regulator 10 DPC cup adapter coupling 11 Product Cup 06. Warnings Before putting the unit into operation , and especially after each cleaning and/or repair operation, a check must be made that the gun components are securely tightened and that the air and/or product hoses are airtight (no air leaks). The gun is easy to handle thanks to its design and the simplicity of its mechanisms. No special training is required for handling the gun. Use the gun according to the operating, maintenance and safety instructions indicated in this manual and follow the application methods indicated to obtain the required quality of finish. Before putting the unit into operation , we recommend you to clean the gun as this has been subjected to functional tests and before packaging it is treated internally with a protective coating, some of which may still remain. Ensure that the products to be applied are chemically compatible with the components the