GFS Recirculating Booths

Inside This Document

GFS's overview of recirculating custom spray booths — systems designed for all types of wet coatings where temperature and humidity control, regenerative thermal oxidizers, or other VOC abatement equipment make exhaust volume expensive. Custom designs deliver up to 100% VOC control with more than 80% reduction in exhausted air, over 80% reduction in heated make-up air, and 99.9%+ particulate removal — the economics that justify recirculation on conditioned or abated finishing lines.

From the Document

G L O B A L F I N I S H I N G S O L U T I O N S Recirculating Custom Spray Booths A System Designed for All Types of Wet Coatings A Must with temperature & humidity control, regenerative thermal oxidizers and other VOC abatement equipment. Custom designed system features up to 100% VOC control. > 80% Reduction in Exhausted Air > 80% Reduction in Heated Air Make-Up > 99.9% Particulate Removal Down to .5 Microns > Major Cost Reduction in Energy Usage and Emission Control Equipment Custom Designed Systems — Achieve Up To: G L O B A L F I N I S H I N G . C O M Example: By Re-Circulating 5,000 CFM this system reduces exhaust by 62.5% Automatic Paint Spray Booths Total Re-Circulating 16,000 CFM Exhaust 4,000 CFM Total Air Flow 20,000 CFM Automatic Re-Circulating capacity with conveyor opening Manual Paint Spray Booths Total Re-Circulating 5,000 CFM Exhaust 3,000 CFM Total Air Flow 8,000 CFM Manual Re-Circulating capacity with conveyor opening ©2016 Global Finishing Solutions. All Rights Reserved. RECIRC 12222016 Example: By Re-Circulating 16,000 CFM this system reduces exhaust by 88% Conveyorized Booths The primary fan/motor unit is designed to provide an internal cross ventilation airflow through the booth. The Consta-Flow™ system is designed to automatically adjust the recirculation fan to the changing conditions of the exhaust filters. This system consists of a variable frequency drive that controls the recirculation fan motor, differential pressure gauge and sensing probes that monitor the static pressure. The result is a booth with constant airflow as the filters load up…