DeVilbiss TEKNA Air Cap

Inside This Document

Reference guide for the DeVilbiss TEKNA Air Cap — air cap, nozzle, and setup selection data to match the right configuration to the application. Distributed by CET.

From the Document

TE40 Air Cap Model #PRO-103-TE40 Used over Fluid Tips: PRO-205-10* PRO-205-12* PRO-205-14* Typical Applications: Wood, General Industrial, Metal, Ceramic, Vitreous Enamel, Lubricants, Adhesive, Plastic, Aerospace, Military, Decorative, Construction, Light Marine, Release Agent TEKNA ProLite Pressure Fluid Needle PRO-320-085-10 PRO-320-12-14 PRO-320-12-14 Used on Gun Type: TEKNA ProLite Pressure Hand Guns Pattern Shape: Straight sides/tapered ends Design Target Distance: 250mm (10”) Approximate Fan Size: 380mm long x 80mm wide @ 320 ml/min 20 sec Din 4 Spray Pattern Typical Fluid Flow Specification: Small to Medium scale application Air Cap. 250 – 400 ml/min Viscosity Range Sprayed: 15 to 35 sec Din 4 Fluid Supply: Pressure Feed Original design specification: Solventbased & Waterbased coatings. Small to medium production. 2 to 4 bar dynamic inlet Pressure Materials of Construction: Electroless Nickel Plated Brass Air Cap and Retaining Ring Part Number: PRO-103-TE40-K (Cap & Retaining Ring). Notes: *Internal profile originally designed for Pressure Feed Applications Air Consumption Graph (Measured using TEKNA ProLite with 1.4mm Fluid Tip) High Efficiency HV30 Air Cap Model #PRO-103-HV30 HVLP Used over Fluid Tips: PRO-205-10* PRO-205-12* PRO-205-14* PRO-200-12 PRO-200-13 PRO-200-14