C.A. Technologies 2.5 Gallon Pressure Tanks

Inside This Document

The product information manual for C.A. Technologies' 2.5 gallon (non-ASME) pressure tanks: 51-201 single regulated, 51-202 double regulated, 51-202-SS with stainless steel outlet fittings and pick-up tube, and 51-207 with inline regulators. Covers safe operation — including the 15 PSI OSHA limit when spraying flammables from non-ASME vessels — along with pressurizing and depressurizing procedure and the complete parts breakdown.

From the Document

NON AGITATED PRESSURE TANK PRODUCT INFORMATION 2.5 GALLON (NON-ASME) 51-201 SINGLE REGULATED 51-202 DOUBLE REGULATED 51-202-SS DOUBLE REGULATED, STAINLESS STEEL FITTED* 51-207 DOUBLE REGULATED (INLINE REGULATORS) *STAINLESS STEEL FITTED TANKS HAVE STAINLESS STEEL OUTLET FITTINGS AND PICK-UP TUBE Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 www.spraycat.com IMPORTANT NOTE: IF THIS PRESSURE TANK IS TO BE USED FOR SPRAYING FLAMMABLE MATERIALS, OPERATOR MUST NOT PRESSURIZE THIS TANK MORE THAN 15 PSI TO MEET OSHA REQUIREMENTS. FOR NON-ASME PRESSURE VESSELS. IT IS THE RESPONSIBILITY OF THE OPERATOR TO FOLLOW THIS MANDATORY PROCEDURE. GENERAL INFORMATION This pressure tank is equipped with either single or double air pressure regulation, pressure safety relief valve, a disposable plastic liner, and four caster wheels. CAUTION! 1. Maximum tank pressure of 80 psi. The safety relief valve is designed to protect the tank against excessive pressures. DO NOT attempt to make adjustments to this valve. If this valve begins to vent air, reduce the setting on the air inlet regulator. 2. DO NOT alter the tank in any way by welding, drilling or machining as this may weaken the structure of the tank. 3. To prevent hazardous static sparks from occurring, always ground the tank by connecting a 12 ga. wire to the tank and to a known earth ground. 4. Be sure tank pressure is completely relieved before attempting to remove tank cover or material fill cap. Shut off the main air supply to the tank and vent pressure using the…