Wagner PEM-X1 CG Manual Powder Coating Cup Gun

wagner PEM X1 CG powder coating cup gun

The simple handling and perfect ergonomics of WAGNER cup guns make them ideal for lab and development purposes and for powder coating individual items and very small quantities.

 

 

 

 

 

 

 

 

 

– Simple plug-in principle for the cup
– Short and safe paint change times of approximately 15 seconds.
– Funnel beaker with special geometry
– The different slope angles ensure constant flow even with difficult   powder types
– Integrated Venturi feeding principle
– Very fine and constantly homogeneous dosage dispensing of the powder   quantity
– The coating parameters are set via the control module
– All coating-relevant parameters are saved and accessed via  the fully electronic control module

  • 100,0 kV
  • 0,3 MPa, 3,0 bar, 44 PSI
  • 5 – 45 °C, 41.0 – 113.0 °F
  • 0,6 kg, 1.2 lb